MIR-6002 THERMOPILE SENSOR WITH BUILT-IN
THERMISTOR
FEATURES:
 | 1.3mm diameter radiation receiving area is optimized for use in radiation thermometers. |
| Thermopile is composed of 60 thermocouple in series connection. |
| Built in thermistor makes temperature compensation easy. |
| Filter transmission waveband of 6.4 to 14 microns. |
CHARACTERISTICS
| |
Min
|
Typical
|
Max
|
Unit (Condition)
|
| Sensitivity |
10.7 |
13.6 |
16.5 |
V/W (500K, DC) |
| Resistance |
8 |
11 |
14 |
K Ohm |
| Output Voltage |
110 |
140 |
170 |
µV (500K, DC) |
| Noise Voltage |
11.5 |
13.4 |
15.2 |
nV / root Hz. |
| NEP |
0.7 |
1.0 |
1.4 |
nW / root Hz. |
| Detectivity D* |
0.8 |
1.2 |
1.7 |
108 cm root Hz. / W (500K, DC) |
| Thermal Time Constant |
. |
80 |
. |
mSec |
| Thermistor Resistance |
50 K Ohm +/- 2% |
Ambient Temp.: 25°C |
| Thermal Coefficient NTC |
3840 K Ohm +/- 1% |
B ntc |
| Operating Temp. |
-20 to +50 |
°C |
| Storage Temp. |
-40 to +80 |
°C |
| No. of Elements |
60 |
|
| Active Area |
1.3 dia. |
mm |
| Spctral Response |
6 ~ 14 |
µm |
OPTICAL CHARACTERISTICS
| Substrate |
Silicon |
| Spectral Cut-on |
6.4 µm |
| Transmission |
Tmax > 70% |
FIELD OF VIEW
EXTERNAL DIMENSIONS
 
With incident radiant energy, get plus (+) output at pin 3 and minus (-)
output at pin 1
Keep plus (+) and minus (-) polarity floating from ground when an operational amplifier is
used with a single power source.
Connect thermister at pins 2 and 4
Back to top
|
FUJI &
CO.(Piezo Science)
